PRO10SV3

Professional subwoofer, 150 Watt RMS 10", fibreglass cone woofers and new amplification electronics for more dynamism and accuracy.

Designed to work alongside any of Prodipe's studio monitors.


Partner :

Specifications

  • Brand : Prodipe
  • Amplification : Power RMS (peak) : 150W (270W)
  • Dimensions : 383(H)×355(W)×398(D) mm
  • Weight : 18Kg
  • Frequency response : 36Hz-150kHz
  • Signal - noise : 98dB
  • Woofer : 10'' Fibreglass cone
  • Input connectors :
  • 2 x XLR (3-pins)
  • 2 x 1/4" TRS - 10k Ohm (Balanced)
  • 2 x RCA - 10k Ohm (Unbalanced)
  • Output connectors :
  • 2 x XLR (3-pins) (Balanced)
  • 2 x RCA - 10k Ohm (Unbalanced)
  • Phase : 0° / 180°
  • The woofer cones are now in fibreglass. Using fibreglass in all our speakers means that we've been able to increase performance and dynamism, the frequency response is even more linear and the quality of the listening is wonderfully natural.
  • The transducer magnets are shielded by anodised steel covers.
  • The active filtering has been completely overhauled to ensure that the crossover frequency doesn't suffer from any accidents or bumps, and that the subwoofer phase reversal and low-cut are adjustable.
  • The casing is made of high density wood to give the sound a high level of consistency and to eliminate any unwanted vibration.
  • Unlike many of the other manufacturers, we made the decision to put the bass reflex port at the front of the subwoofer to improve the decompression on the bass response. This makes it much easier to find the best position for the speaker.
  • There are ample connectors for an all-round use: XLR/TRS 6.35 Jack for a balanced connection, and Cinch (RCA) for an unbalanced connection.
  • A compact, elegant design with a well-finished exterior.